广告
首页 > automotive-testing > 正文
Millbrook awarded approval for 4WD climatic chassis dyno
2019-09-05 14:40:16· 作者：RACHEL EVANS
Millbrook Proving Ground has gained Vehicle Certification Agency (VCA) facility approval for its 4WD climatic emissions chassis dynamometer. This certification will allow it to carry out WLTP emissions tests.
Millbrook Proving Ground has gained Vehicle Certification Agency (VCA) facility approval for its 4WD climatic emissions chassis dynamometer. This certification will allow it to carry out WLTP emissions tests.
The first of two 4WD climatic emissions chassis dynamometer facilities was installed and became operational in late 2016. It allows the testing of emissions, fuel consumption, electricity usage, range and performance in temperatures between -20°C and 50°C. The facility has now been certified within the new WLTP Regulations, EU 2017-1151, which also supports EU 2017-1154 for Real Driving Emissions (RDE) testing.
Millbrook is currently installing a second 4WD climatic emissions chassis dynamometer, together with additional soak space, portable emissions measurement systems (PEMS) workshops, and a 4E Powertrain rig facility at its UK proving ground.
“We have always taken pride in offering the best test, validation and certification services in the industry, and the addition of our state-of-the-art 4WD dynamometer in 2016 was a major enhancement to our capabilities. VCA’s approval of the facility is a welcome development,” said Phil Stones, chief engineer – propulsion, Millbrook.
The first of two 4WD climatic emissions chassis dynamometer facilities was installed and became operational in late 2016. It allows the testing of emissions, fuel consumption, electricity usage, range and performance in temperatures between -20°C and 50°C. The facility has now been certified within the new WLTP Regulations, EU 2017-1151, which also supports EU 2017-1154 for Real Driving Emissions (RDE) testing.
Millbrook is currently installing a second 4WD climatic emissions chassis dynamometer, together with additional soak space, portable emissions measurement systems (PEMS) workshops, and a 4E Powertrain rig facility at its UK proving ground.
“We have always taken pride in offering the best test, validation and certification services in the industry, and the addition of our state-of-the-art 4WD dynamometer in 2016 was a major enhancement to our capabilities. VCA’s approval of the facility is a welcome development,” said Phil Stones, chief engineer – propulsion, Millbrook.
广告 
广告
编辑推荐
最新资讯
-
测迅乌镇&盐城测试场：助力智能网联汽车标
2025-02-22 12:39
-
使用示波器对三相电机驱动器进行测量
2025-02-22 12:37
-
上汽集团大乘用车重磅招聘
2025-02-22 12:25
-
GB/T 44173-2024对开门预警DOW的要求
2025-02-22 12:25
-
声音工程：像用PS一样编辑声音
2025-02-21 17:04
广告
广告
